Payment & Shipping Terms:
|Connector:||2.5mm Universal Connector||Output Power:||1MW,3MW,5MW,10MW,15MW|
fiber optic cable tools,
fiber optic cable testing tools
The Pen Type VFL is the easiest way to identify fibers from end
to end and locate polished connector end faces. Its red laser
shines through most yellow-jacketed fibers to help you pinpoint
breaks, bends, faulty connectors, splices and other causes of
signal loss. It has a reach of up to 20 km*.
(a) Visual Fault Locator is used for locating broken point in fibers.
(b) Visual Fault Locator is equipped with a 650-nm visible laser diode, can be operated in continuous or pulse modes for the clear noticeable results
(c) One green LED indicator shows the operating mode .
(d) Power switch on the end for battery on/off .
(e) Push button operate CW / Mod. (2.5 Hz frequency) / pause .
(f) Clip pocket-size pen design.
(g) Protective cap for extra protection .
(h) Low Battery Indicator: the Status LED will turn to red when batteries power are low.
(1) Central Wavelength : 650 +/- 10 nm
(2) Output Power: >0.5mW into Single-modefiber
(3) Spectral Width: < 10 nm
(4) Transmission: CW or 2.5 Hz pulse
(5) Batteries: 2xAAA Alkaline batteries
(6) Operating Temp.: 0¡æ~ 50 ¡æ
(7) Detecion Distance: < 6 Km
(8) Dimension/Weigth: 13.5mmX170mm / 88 g
(9) Light Source: Class 3A laser diode
* Option 1: Adapter Type (AC Adapter,DC 3V)
* Option 2: 1.25 Ferrule (VFL-125)
* Option 3: Output > 10 mw (VFL-1000)