Payment & Shipping Terms:
|Type:||GYTC8S||Central Strength Member:||Steel Wire|
|Jacket:||PE||Outer Diameter:||10.5 +_0.3mm* 17.8mm +_0.3mm|
|Fiber Count:||6~144core||Temperature Range:||-20degree +70 Degeree|
|Laying Method:||Self-support Aerial Installation|
6-144 Core GYTC8S Figure 8 Self Supporting Outdoor Fiber Optic Cable for aerial
The fibers are placed in a loose tube made of high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire locates in the center of core as a metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular cable core. After PSP is applied around the cable core, this part of cable accompanied with the stranded wires as the supporting part are completed with a polyethylene (PE) sheath to be figure 8 structure. This kind of cable is specifically applied for self-supporting aerial installation.
Outdoor Optical Cables for Communications with Metal Reinforcement Components, Layer-stranded Filling, Steel-polyethylene Bonded Sheath and 8-shaped Self-supporting
Full section water blocking structure ensures good water and moisture resistance.
The special casing is filled with special ointment to protect the optical fiber.
Longitudinally wrapped steel band to enhance the lateral pressure resistance of optical cable.
The 8 self supporting structure has high tensile strength and is easy to lay on overhead and reduce installation cost.
Product life is more than 30 years.
Application: suitable for long distance communication and inter office communication.
The way of laying: self bearing overhead.
Working temperature: -40 ~ +70 C
Hanger: 1.2 * 7, 1.5 * 7 specifications.
Bending radius: 10 times static cable diameter.
Dynamic 20 times cable diameter
"8" shaped self supporting optical fiber cable
Protection of primary coated optical fiber by loose casing
The cable section is "8" shaped.
Accurate fiber excess length ensure a good performance of tensile strength and temperature.
High strength loose tube that is hydrolysis resistant and special tube filling compound ensure a critical protection of fiber.
The following measures are taken to ensure the cable watertight:
Steel wire as the central strength member
Loose tube filling compound
100% cable core filling
PSP enhancing moisture-proof
The steel strands are self bearing and easy to install, so as to reduce construction cost.
Fill up the water blocking ointment by way of process and block the whole section of the cable unit.
Control of residual length of optical fiber
After cable formation, the additional attenuation of the fiber is better than 0.02dB/Km, and the dispersion value is unchanged.
The temperature range is -40 C ~+70 C.
GYTC8S 2~144 core "8" shaped self supporting optical fiber cable
Applicable laying mode
Self support and overhead
The section of the cable is "8".
Stranded wire hanger
Double sided overlay plastic corrugated steel belt polyethylene adhesive external sheath
The steel strip is armoured with good performance in compression and flat.
It has certain bulletproof ability.
The steel strands are self bearing parts with high tensile strength and convenient construction.
• Suitable for aerial, pipeline laying method.
• Adopted to outdoor distribution.
• Long distance and local area network communication.
Label will be sticked at wooden drum,include style of optical cable and fiber account,length,Gross weight KGS,Total drums amount,manufacture date