Payment & Shipping Terms:
|Specification:||1 In 1 Out||Application:||Optical Fiber Network Cabling|
optical cable accessories,
fiber optic parts and accessories
Outdoor Optical Fiber Junction Box Waterproof With Black Color 1 Into 1 Out
Outdoor Optical Fiber Waterproof Protection Box 1 Into 1 Out Of Line Flange Junction Box Black Color
Round leather line optical cable protection box ,also called as following:
SC leather wire optical cable protection box,
SC leather wire optical fiber fusion box
Round butterfly-shaped cable welding protection box, fiber-to-home welding protection box, round butterfly-shaped cable welding protection box, hot-melt protection box, fiber-optic mechanical welding protection box, fiber-optic cable and tail-fiber welding fixed box circular butterfly-shaped cable welding protection box, product overview:. At present, the butterfly fiber optic cable is widely used in the FTTH fiber to home project. The butterfly-shaped optical cable and butterfly-shaped optical cable butt-joint is the most widespread is the use of cold-joint mode, fiber cold-joint there are some problems: cold-joint products too dependent on matching fluid; product requirements for cutting knives, construction personnel of optical fiber cutting technology and operation of serious proficiency requirements are very high; detection of the accuracy of docking and the quality of the connection. The amount can not be assessed, the company's product development team based on the past accumulated in the field of optical fiber technology research and development of a new butterfly cable and butterfly cable protection kit. The new butterfly-shaped cable and butterfly-shaped cable weld protection box is a kind of butterfly-shaped cable with a heat-shrinkable protective tube which is melted into it, so that the weld joint can be better protected. Compared with cold-welded products, it can improve the optical performance of the connector, thereby increasing the effective connection rate to 100%, and prolonging the service life of the product. Life, reduce maintenance costs later.
1. the melting point is built in the heat shrinkable protection bushing, which greatly improves the reliability of the product.
2. the continuous pass rate is one hundred percent, which greatly saves the construction time.
3. High optical performance can be achieved by fusing optical cables. The average insertion loss is less than-0.03 dB and the return loss is more than-60 dB.
4. The product is not affected by the environment in use, has no trouble rate, has long service life, reduces the later period maintenance cost.
5. the rear end optical fiber structure is tightened so that the cable tension is greater than 60N.
6. the operation is simple and quick, and the operator needs no professional skills.
[product configuration]: conventional can be equipped with SC, FC, LC, ST bunchy (ribbon) pigtail.
The cable junction box is 1 in and 1 out, suitable for 2.0 fiber optic cable, 3.0 fiber optic cable and "8" shaped fiber optic cable continuous protection. It can be built up and can be hung by walls. Material: brand-new ABS flame retardant fuel, quality assurance, flame retardant performance in line with the communications industry standards, flame retardant grade UL94V-0
Product uses: FTTH optical fiber to home cable optical fiber cable protection box.
|Suitable cable diameter||Φ2-Φ3mm,figure 8 drop cable|
|number of port||1 in 1 out|
|Color||black or white|
|Sealing type||TPE Seal ring|
|laying method||aerial or wall hanging|