Payment & Shipping Terms:
|Jacket:||PVC/LSZH/OFNP||Length:||3m,5m ,10m,15or As Requested|
|Cable Type:||OM5 50/125||Clour:||Light Green|
fiber optic pigtail,
fiber optic patch cables
Excellent LC TO LC Duplex MM OM5 Fiber optic patch cord Light green color LSZH
OM5 fiber hopping, broadband multimode fiber hopping (WBMMF), defined by TIA and IEC, is a new standard for fiber hopping with a diameter of 50/125 micron. Compared with OM3 and OM4 fiber hopping, OM5 fiber hopping can be used for higher bandwidth applications.
Chaozhou Third Ring Ceramic Core Inserter, the largest manufacturer of ceramic cores in China, is adopted to ensure the quality of ceramic cores. After production and processing, the test data is less than 0.2dB, which fully meets the domestic and foreign telecommunication standards.
2. Adopting Corning, Changfei, Beacon, Fujikura, Mitsubishi 9/125 high-quality single-mode core, long transmission distance, low data stability attenuation and wider transmission bandwidth.
3. PVC/LSZH low smoke halogen-free two kinds of materials are used for fiber optic cable sheath, environmental protection, flame retardant, high and low temperature performance is good, in line with ROSH environmental protection certification, EU exports, core high-end cabling room use more reliable.
4. The length of jumper can be customized arbitrarily. The General specifications are: 1 meter, 2 meters, 3 meters, 5 meters, 7 meters, 10 meters, 15 meters, 20 meters, 30 meters, 50 meters, 100 meters. Other lengths can be customized according to the requirements.
According to the fire-proof grade of buildings and the fire-proof requirements of materials, the integrated wiring system should take corresponding measures. Flame-retardant cables and fiber optic cables shall be used for the distribution of discharge cables or fiber optic cables in flammable areas and building shafts; flame-retardant, low-smoke and low-toxic cables or fiber optic cables shall be used in large public places; flame-retardant wiring equipment shall be used between adjacent equipment or between handover lines.
|Connector||LC/UPC-LC/UPC||Outer diameter of sheath||2.0 mm|
|Fiber type||50/125μm MM DX||Jacket color||green|
|Working temperature||-60~75°C||Storage temperature||-45~85°C|
|Effective mode bandwidth (850nm)||≥4700 MHz·km||Effective mode bandwidth(953nm)||≥2470 MHz·km|
|Polarity||A(Tx) to B(Rx)||Fiber grade||G651|
High end quality,in line with the international IEC quality inspection standards,by the engineering wiring in admiration,low loss,return loss is big,high reliability,better stability and better alignment,
Fiber-optic jumper products are widely used in communication room, fiber-optic to home, local area network, fiber-optic sensor, fiber-optic communication system, fiber-optic connection transmission equipment, national defense preparedness and so on.
It is suitable for CATV network, telecommunication network, computer optical fiber network and optical test equipment. Subdivision is mainly applied to several aspects.
1. optical fiber communication system
2. optical access network
3. optical fiber data transmission
4. fiber CATV
5. LAN (LAN)
6. test equipment
7. optical fiber sensor